Telephone
-
-
E-mail
info@hsckontrol.com
-
Address
Oruçreis Mahallesi Giyimkent 16. Sokak No:103/A Esenler / İSTANBUL
MP1 Machine Panel
MP1 Machine Panel
MP1-21BTA is a machine operation panel with physical buttons designed to be used in Pulser series CNC control units. It has 21 buttons and 21 LEDs on it. You can program the buttons and LEDs using the internal ladder software to make them suitable for your machine.
| Buttons | Explanation |
| G01% | Feed Rate Speed Ratio Control Button (Rotary Switch) |
| SSO% | Spindle Speed Override (Rotary Switch) |
| X, Y, Z | Selection of Linear Axis |
| A, B, C | Selection of Rotary Axis |
| +> | Jogging the selected axis in the positive direction |
| <- | Jogging the selected axis in the negative direction. |
| Rapid | G00 High-Speed Selection Button (valid in jog mode) |
| %0 | G00 Ratio of the Specified Maximum Speed |
| %25 | G00 Ratio of the Specified Maximum Speed |
| %50 | G00 Ratio of the Specified Maximum Speed |
| %100 | G00 Ratio of the Specified Maximum Speed |
| Coolant | Open/Close Cooling Water |
| Tool Unclamp | Spindle Tool Clamping/Unclamping |
| All Home | Send all axes to the reference point in a specified order |
| Reset | Reset the alarm and automatic operation |
| CW | Rotate the spindle clockwise |
| STOP | Spindle stop |
| CCW | Rotate the spindle counterclockwise |
| FN1 | Special Function Button 1 |
| FN2 | Special Function Button 2 |
