Pulser3 Programming Manual
Download PDF
G17/G18/G19: Plane Selection
Arc motion, tool offsets, and canned cycles are applied to the selected axis group. The axis for which the tool length offset will be applied is determined by PRM320. In the milling model, G17 is selected by default at startup, whereas in the turning model, G18 is the default selection at startup.
PRM320:
0: Tool length offset is always applied to the Z axis
1: Tool length offset is applied to the X, Y, and Z axes according to the selected plane
|
Format: |
G17/G18/G19 |
G17: XY Plane selection
G18: ZX Plane selection
G19: YZ Plane selection