Library

Multiple programs can be stored in the library and selected for use at different times. The names of the programs cannot exceed 63 characters in length. 

Supported file extensions: .nc .cnc .tap .ngc .anc .gcode .txt 

           In the library, subprograms can be stored alongside programs. Subprograms must follow specific naming rules. A subprogram should start with a capital "O" followed by a 4-digit program number. The file extension must be .cnc.

Example: O9001.cnc

A program file can be copied to the library via the USB port on the HMI or through FTP from a PC.